StarTech.com USB 3.0 to SATA HDD Duplicator Dock

USB 3.0 to 2.5 / 3.5in SATA HDD Duplicator Dock and Eraser
USB 3.0 SATA Hard Drive Duplicator & Eraser Dock - Standalone 2.5/3.5in HDD & SSD Eraser and Cloner
"Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 for easy access - USB 3.0 SATA HDD/SSD Dock- 1:1 Duplicator"
2 Year warranty

The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for external drive management.

Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.

With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking station is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer.

Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.

The SATDOCK2REU3 is backed by a 2-year StarTech.com warranty and free lifetime technical support.

Indicators
LED Indicators	Power / 50%
Packaging Information
Package Height	13 cm [5.1 in]
Package Length	19.5 cm [7.7 in]
Package Width	16.5 cm [6.5 in]
Shipping (Package) Weight	885 g [31.2 oz]
Performance
Duplication Modes	Sector by Sector (Whole Drive)
Duplication Speed	11GBpm
Erase Modes	1-Pass Overwrite (NIST SP 800-88 Rev 1 - Clear)
Max Drive Capacity	Currently tested with up to 4TB 7200 RPM 3.5 hard drives and 1TB 7200 RPM 2.5 hard drives
Maximum Data Transfer Rate	3Gbps
Type and Rate	SATA II (3 Gbps)
	USB 3.0 - 5 Gbit/s
Physical Characteristics
Product Height	6.2 cm [2.4 in]
Product Length	12.8 cm [5 in]
Product Width	10.3 cm [4.1 in]
Weight of Product	424 g [15 oz]
Power
Center Tip Polarity	Positive
Input Current	1.2A
Input Voltage	100 - 240 AC
Output Current	3000mA
Output Voltage	12V DC
Plug Type	M
Power Consumption (In Watts)	36
Power Source	AC Adapter Included
Prominence
Description CDW 75 - 1st Line	StarTech.com USB 3.0 SATA HDD/SSD Duplicator Eraser Dock for 2.5/3.5 drives
Software
OS Compatibility	OS independent; No software or drivers required
Special Notes / Requirements
Note	Destination drive must be the same size or larger than the source drive
What's in the Box
Included in Package	HDD Dock
	Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand
	USB 3.0 Cable
	User Manual
Indicators
LED Indicators	Link / 25%
	HDD2 / 100%
	HDD1 / 75%
Hardware
Number of Drives	2
Interface	USB 3.0
Fan(s)	No
Drive Size	2.5in & 3.5in
Drive Installation	Removable
Compatible Drive Types	SATA
Chipset ID	Prolific - PL2775
Environmental
Storage Temperature	-10°C to 95°C (14°F to 203°F)
Operating Temperature	0°C to 85°C (32°F to 185°F)
Humidity	5-90%
Connector(s)
Host Connectors	USB Type-B (9 pin) USB 3.0
Drive Connectors	SATA Data & Power Combo (7+15 pin)

Manufacturer Information:https://www.startech.com/en-au/SATDOCK2REU3