StarTech.com Hard Drive Adapter 2.5 SSD/HDD to 3.5

"2.5"" to 3.5"" Hard Drive Adapter - For SATA and SAS SSDs/HDDs"
"2.5"" to 3.5"" Hard Drive Adapter - For SATA and SAS SSDs/HDDs"
"Turn almost any 2.5"" SATA/SAS drive into a 3.5"" drive - 2.5” SATA/SAS Drive to 3.5” SATA HDD Adapter"
2 Year warranty

This 2.5 to 3.5 hard drive adapter lets you install a 2.5 SATA or SAS hard drive (HDD) or solid-state drive (SSD) into an internal or external 3.5 drive bay, using standard drive-mounting holes.

Convert a 2.5 drive into a 3.5 drive

The 2.5 to 3.5 hard drive bay adapter lets you install a newer, higher performance drive such as an SSD into a legacy system that may only support a 3.5 hard drive. It provides a cost-efficient way to enhance storage performance and reliability without expensive upgrades to core IT systems. It's also ideal for system administrators who want to build a system that takes advantage of the increased performance of a 2.5 HDD/SSD.

To utilize the full speed potential of your SATA/SAS drive, the adapter supports transfer speeds up to 6Gbps.

Easy and flexible installation

You can install the adapter into a desktop, server, storage-array, hot-swap bay, and drive drawer. It offers permanent installation in a 3.5 drive bay with standard mounting holes. When the adapter is installed, you simply slide a 2.5 HDD/SSD into the adapter enclosure, with no tools required. 

The adapter is suitable for drives with a height of up to 15 mm. Virtually any 2.5 SATA/SAS drive can be made to look and function like a 3.5 drive.

Identify and track your drives

The adapter includes a label you can use to track and record information about the installed drive.

The 25SATSAS35HD is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Hardware
Supported Drive Height(s)	15mm
	7mm
	9.5mm
Packaging Information
Package Height	3.5 cm [1.4 in]
Package Length	16 cm [6.3 in]
Package Width	11.2 cm [4.4 in]
Shipping (Package) Weight	270 g [9.5 oz]
Performance
4Kn Support	Yes
Hardware Raid Supported	No
Hot Swap Capability	Yes
S.M.A.R.T. Support	Yes
TRIM Support	Yes
Type and Rate	SATA/SAS 6 Gbps
Physical Characteristics
Color	Silver & Black
Material	Aluminum and Plastic
Product Height	2.6 cm [1 in]
Product Length	14.6 cm [5.7 in]
Product Width	10.1 cm [4 in]
Weight of Product	224 g [7.9 oz]
Prominence
Description CDW 75 - 1st Line	StarTech.com 2.5 to 3.5 Hard Drive Adapter - For SATA and SAS SSDs/HDDs
Special Notes / Requirements
Note	Although mobile racks can enable a Serial Attached SCSI (SAS) drive to connect using a standard Serial ATA (SATA) connector, the drive controller must be SAS compatible to properly support SAS drives. SAS controllers can work with SAS and SATA drives, but most SAS drives will only work with a SAS controller.
What's in the Box
Included in Package	Hard Drive Adapter
	Quick-Start Guide
	Set of Mounting Hardware
Hardware
Supported Drive Height(s)	12.5mm
Number of Drives	1
Number of 2.5 inch bays	1
Interface	SATA
	SAS
Front Door Key Lock	No
Fan(s)	No
Drive Size	2.5in & 3.5in
Drive Installation	Removable
Compatible Drive Types	SAS & SATA
Environmental
Storage Temperature	-20°C to 55°C (-4°F to 131°F)
Operating Temperature	0°C to 55°C (32°F to 131°F)
Humidity	5% ~ 65%
Connector(s)
Host Connectors	SATA Data & Power Combo (7+15 pin) Receptacle
Drive Connectors	SFF-8482 (29 pin, Data & Power, Internal SAS) Receptacle

Manufacturer Information:https://www.startech.com/en-au/25SATSAS35HD